SRP-4 Probe Crystal Tips for CMI700 CMI563

SRP-4 Probe Crystal Tips for CMI700 CMI563

$280≥1Piece/Pieces

Payment Type:	T/T,Paypal
Incoterm:	FOB,CFR,CIF,EXW,FCA,DDU
Min. Order:	1 Piece/Pieces
Transportation:	Air,Express
Port:	Shenzhen

Contact Now

Product Description

Product Attributes

Packaging & Delivery

Product Description

Product Attributes

Model No.: SRP-4

Brand: Hitachi

Place Of Origin: United States

Brand: Hitachi(Oxford)

Used For: SRP-4 probe

Packaging & Delivery

Selling Units	:	Piece/Pieces
Package Type	:	1pcs/bag

Hitachi SRP-4 CRYSTAL TIPS



Product Description

SRP-4 Tips is used for Oxford/Hitachi SRP-4-surface copper probe,by change the tips it will be more convenience and lower cost for the user.

SRP-4 surface copper probe(Probe Tips) test technical parameters

Dedicated to Oxford CMI760(CMI700) bench hole surface copper thickness gauge

Accuracy: 5%, reference standard film

Accuracy: Chemical copper: standard deviation 0.2%, electroplating copper: standard deviation 0.3%

resolution: 0.1μm≥10μm, 0.01μm<10μm, 0.001μm<1μm, 0.01mils≥1 mil, 0.001mils<1mil

Thickness measurement range: Chemical copper: 0.25μm - 12.7μm (10μin - 500μin)

Electroplated copper: 2.5μm - 254μm (0.1mil - 10mil)

Linear copper wire width range: 203μm - 7620μm (8mil - 300mil)

Srp-4 Probe Tips is replaceable

1. If the probe tip is damaged, it can be replaced in time on site, which is simple to operate and minimizes the downtime of the equipment

2. The replaceable of tip reduces the cost of replacing the entire probe

3. One-stop service: Our comprehensive product range provides a complete solution for your PCB/PWB and surface copper thickness measurement needs.

Working characteristics: The application of advanced micro resistance testing technology. The tethered probe consists of four probes, AB being positive and CD being negative; When measuring, the current will have a small resistance from the positive electrode to the negative electrode, and the surface copper thickness is accurately and reliably obtained through the functional relationship between the resistance value and the thickness value, which is not affected by the insulation board layer and the copper layer on the back of the circuit board. The worn SRP-4 probe is self-replaceable and is a patented product of Oxford Instruments. The probe's lighting function and protective cover facilitate accurate positioning during measurement.

Srp 4 Tips